Aerospace series. Tempered float glass plies for aircraft applications. Technical specification Ingestion-build-228203 Measurements are performed in order

Measurements are performed in order to minimize the risk to the public by checking the quality of water supplies

quality control during the manufacture and shop-testing

Why should you use BS EN 772-21 - Water absorption of clay and calcium silicate masonry units

NOTE Any reference to the term "outer wall element" implies both the outer wall elements and their fittings

for the preparation of pastes (also known as plastisols) from appropriate PVC resins

Aerospace series. Tempered float glass plies for aircraft applications. Technical specification Ingestion-build-228203 Measurements are performed in order1 Scope This document specifies the requirements for tempered soda lime float glass plies which are made from annealed glass either of the universally available type or of high light transmission type. The annealed glass is manufactured by a continuous process for general use. The plies are tempered by either a thermal or chemical process. The tempered glass is used mainly for cockpit glazing.